Quote:
Originally Posted by Low and Mean
The stock Fury Wheel is 7" wide, we are taking it to about 8" this will give us just over a 1/2" on ea side for the 240 tire. With this setup the end user might have to adjust his frame, We just did ours with a bottle jack and it was very simple took 5 min. If you can just even up the sides, at the most ours was off 1/8". The tire will squeeze in and between the frame. It's for sure a very tight fit, but possible. The swingarm is still 231mm and will be the final say on how big you can go without cutting or grinding.
LM
|
someone correct if I'm wrong but isn't the stock Fury wheel 6.25" wide?
