Stock Exhaust Baffle Question - Honda Fury Forums: Honda Chopper Forum
 
 


» Insurance
» Honda Fury Prices
» Sponsors
Reply
 
LinkBack Thread Tools Display Modes
Old 11-19-2012, 02:24 PM   #1 (permalink)
Junior Member
 
Join Date: Sep 2012
Posts: 20
Default Stock Exhaust Baffle Question

I think I am going to do the stock exhaust modification, but I'm a bit confused after looking in my tail pipe... (Insert joke here).

I don't appear to have any sort of hole in my stock baffle, I am looking at the stock baffle right?

These pics are of the top and bottom chamber of the stock exhaust. Is the bit I'm meant to drill the solid metal part in the middle?



And to mod I basically stick a 3/4 drill bit in and go for it?
McDodge is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-19-2012, 03:24 PM   #2 (permalink)
Member
 
Sthrnflvr89's Avatar
 
Join Date: Sep 2012
Posts: 93
Default

Disassemble the whole exhaust from the motor and frame take off the chrome covers and you'll see your while muffler there with a porta band or cutting tool cut it in half right after the frame bolt ups and you'll still have a little baffle in there but for the most part straight exhaust then you can reassemble and it will
Still look just like stock exhaust this is what I done until I could afford
My fsd exhaust
Sthrnflvr89 is offline   Reply With Quote
Old 11-19-2012, 05:06 PM   #3 (permalink)
Senior Member
 
macxpert's Avatar
 
Join Date: Oct 2009
Location: Northern Beaches of Sydney NSW Australia
Posts: 2,694
Default

You have the same muffler as me and I think it is the one used on the AU, EU and UK bikes with O2 sensors. It is on the AU ones for sure.

You could drill out the plate at the end of the inner tube, start with a 6mm hole and work your way up to 15 or 16mm depending on how loud you want it.
macxpert is online now   Reply With Quote
Old 11-21-2012, 07:26 PM   #4 (permalink)
Senior Member
 
Shawn43's Avatar
 
Join Date: May 2011
Location: Vancouver BC
Posts: 225
Default

Wierd....mine had two small wholes predrilled. I did as you say 3/4 inch hole saw and cut out the plate. Good improvement on sound so it will calm you for a while and give you a chance to save up for mfrs


Sent from my iPhone using Motorcycle.com Free App
__________________
Black PC wheels, National Cycle windshield, C&C 2up Tour Seat, Highway Hawk Sissy Bar, luggage rack, V-Design Mirrors and Flame grips, Joe Florida 207 LED Accent Light kit, Cannella Risers, Custom Chrome LED Star and TruWRAPZ signals, LED relay.
Shawn43 is offline   Reply With Quote
Old 11-21-2012, 09:23 PM   #5 (permalink)
Senior Member
 
macxpert's Avatar
 
Join Date: Oct 2009
Location: Northern Beaches of Sydney NSW Australia
Posts: 2,694
Default

Quote:
Originally Posted by Shawn43 View Post
Wierd....mine had two small wholes predrilled.

Sent from my iPhone using Motorcycle.com Free App
You have the North American muffler. Look closely and you will see you dont have that extra tube in the middle.
macxpert is online now   Reply With Quote
Old 11-22-2012, 06:00 AM   #6 (permalink)
Senior Member
 
macxpert's Avatar
 
Join Date: Oct 2009
Location: Northern Beaches of Sydney NSW Australia
Posts: 2,694
Default

Here is a comparison of the AU & US stock mufflers. You will see that the AU & EU version is quite a bit different. Thanks to Cypress I have a US muffler to experiment with.


Attached Thumbnails
Stock Exhaust Baffle Question-img_0143.jpg   Stock Exhaust Baffle Question-img_0147.jpg  
macxpert is online now   Reply With Quote
Old 11-22-2012, 08:58 AM   #7 (permalink)
Super Moderator
 
Dave Maher's Avatar
 
Join Date: Jul 2009
Location: Boston, MA
Posts: 3,812
Send a message via AIM to Dave Maher
Default

I think you should save youself the time and effort and just change out the exhaust for something aftermarket. Let's face it 99% chance your probably going to do it in the future anyways. Think of it as and early Xmas present to yourself.. Merry Xmas!
__________________
Life is good!
Dave Maher is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
© FuryForums.com
Motorcycle News, Videos and Reviews
Honda Grom Forum Harley Davidson Forum Honda 600RR Forum Kawasaki Forum Yamaha R6 Forum Yamaha FZ-09 Forum
1199 Panigale Forum Roadglide Forum Honda CBR1000 Forum Vulcan Forum Yamaha R1 Forum Yamaha R3 Forum
Ducati Monster Forum Harley Forums Honda CBR250R Forum ZX10R Forum Star Raider Forum Yamaha Viking Forum
Suzuki GSXR Forum V-Rod Forums Honda Shadow Forum Kawasaki Motorcycle Forum Star Warrior Forum KTM Duke 390 Forum
SV650 Forum BMW S1000RR Forum Honda Fury Forum Kawasaki Versys Forum Drag Racing Forum Ducati 899 Panigale Forum
Suzuki V-Strom BMW K1600 Triumph Forum Victory Forums Sportbikes BMW NineT Forum
Volusia Forum BMW F800 Forum Triumph 675 Forum MV Agusta Forum HD Street Forum Suzuki GW250 Forum
Yamaha Motorcycles Victory Gunner Forum Honda Vultus Forum HD LiveWire Forum Ninja H2 Forum Ducati Scrambler Forum Kawasaki Ninja 250SL Forum