Wiring? accutronix plate with brake light - Honda Fury Forums: Honda Chopper Forum
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 10-27-2010, 04:14 PM Thread Starter
Member
 
MilesB's Avatar
 
Join Date: Sep 2009
Location: Cleveland, Ohio
Posts: 97
Wiring? accutronix plate with brake light

I purchased an accutronix side mount plate with brake light and have a few questions. The plate didnt come with enough wire to run up to the harness. What gauge wire should I use? 20awg? The plate mount has 3 wires blue red black. What is what? Brake, running light/plate white led, ground? Lastely, I see the three connectors for the signals, license plate light, and the main harness going into the brake light assembly. The brake light harness has three various color/striped wires. Which is which? Suggestions to tie into it?

Checked around site and have these questions remaining. Thanks

"Never in the field of human conflict was so much owed by so many, to so few."
-Winston Churchill-
MilesB is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 10-27-2010, 05:38 PM
695
Lifetime Member
 
Join Date: Jul 2009
Posts: 1,970
Quote:
Originally Posted by MilesB View Post
I purchased an accutronix side mount plate with brake light and have a few questions. The plate didnt come with enough wire to run up to the harness. What gauge wire should I use? 20awg? The plate mount has 3 wires blue red black. What is what? Brake, running light/plate white led, ground? Lastely, I see the three connectors for the signals, license plate light, and the main harness going into the brake light assembly. The brake light harness has three various color/striped wires. Which is which? Suggestions to tie into it?

Checked around site and have these questions remaining. Thanks
20 awg is fine. I used heat shrink tubing to insulate the wires in the groove of the license plate

License plate
Black = Ground
Blue = Brake light
Red = License / run light
(It's been a couple of weeks since I wired mine, I'm pretty sure the Blue wire is brake. If not, swap Blue with the Red)

Harness
White connector - brown wire = license light
White connector - Green = Ground
3-Plug connector = Green/Yellow tracers = Brake

gone.. Admins please delete my membership.. see ya

Last edited by 695; 10-27-2010 at 05:47 PM.
695 is offline  
post #3 of 3 (permalink) Old 10-28-2010, 02:21 AM Thread Starter
Member
 
MilesB's Avatar
 
Join Date: Sep 2009
Location: Cleveland, Ohio
Posts: 97
Thanks fo the info, it was a big help. All wired up and installed!

"Never in the field of human conflict was so much owed by so many, to so few."
-Winston Churchill-
MilesB is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda Fury Forums: Honda Chopper Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome