Turn Signal switch-self cancelling

skappiris · 07-08-2010, 11:14 PM

I did a quick search on RSS's FAQ...nuttin'.

Anyone got a line on a decent self-cancelling turn signal kit for a Fury.
I can't believe we tolerate this stone-age B.S.

Fury10 · 07-09-2010, 02:25 AM

Try the Kisan Signal Minder. I have one on the VTX and Fury. The one on the VTX has been in use for 4 years with no problems. It has other cool features, too.
Link: https://www.kisantech.com/index.php?cat_id=4

RedspawnSilver · 07-09-2010, 02:26 AM

Quote:

Originally Posted by skappiris

I did a quick search on RSS's FAQ...nuttin'.

Anyone got a line on a decent self-cancelling turn signal kit for a Fury.
I can't believe we tolerate this stone-age B.S.

Sorry, meant to put one in there... So much information sometimes I turn myself around trying to remember what to put in there.

RedspawnSilver · 07-09-2010, 02:29 AM

Quote:

Originally Posted by Fury10

Try the Kisan Signal Minder. I have one on the VTX and Fury. The one on the VTX has been in use for 4 years with no problems. It has other cool features, too.
Link: https://www.kisantech.com/index.php?cat_id=4

Which one would you suggest from this company as I am not familiar with them? When giving out information like this, it is helpful to the community to just give out the part number, especially if you already have it on your bike. Is it the SM-3 or SM-3R???

Fury10 · 07-09-2010, 02:32 AM

SM-3 is what I use. The website is very helpful and I have spoken with them on the phone.

RedspawnSilver · 07-09-2010, 02:35 AM

Quote:

Originally Posted by Fury10

SM-3 is what I use. The website is very helpful and I have spoken with them on the phone.

Thanks, I appreciate the information!

Clueless · 07-09-2010, 07:23 AM

I have one from Glen"s VTX Garage, easy to install, works great. Also have the CPR, it works great also, less strain on the clutch lever.VTX Home

skappiris · 07-09-2010, 07:34 AM

thanks everyone! I've installed the Backoff on all two of the bikes I've owned. I'll check out the specs, etc. and get back to you.
RSS, thanks for considering this FAQ-worthy.

Painter · 07-09-2010, 08:16 AM

Kisan says the SM-3 is the one. However, if you have LED turns, you will have to get resistors for each in order to slow the blinking. (According to Kisan) I haven't ordered yet because I installed the LED flasher to correct the fast blink and didn't use resistors. Kisan said also that the Signal Minder may have slow flash anyway.

If anyone has installed the auto signal with LED's I would be interested in the flash rate without resistors.

Two Wolves · 07-09-2010, 11:34 AM

Thanks Fury 10 for a terrific solution to a vexing problem I've been having. The older I get the more my mind resembles swiss cheese... Great where its solid, but it has lots of holes in it... Turn signal shut-off typically falls in a hole! I'll be ordering one today.