Low Seat Pan covered for the Honda Fury by Low and Mean

[Low and Mean]

Ok, let's start off by saying we do not build seats, we design seat pans to give you the lowest possible position to start from. The stock pan is 1.25 higher than our seat pan. This just means you can use the same amount of foam that you currently have now, but sit 1.25" lower with our pan. 1.25" is a lot!
Here's our seat pan that we covered. There is 2" of foam, but the shape is very comfortable. Stock foam is 2.75" thick, but the shape is not comfortable, this is the biggest problem, not so much how much foam but the shape of the foam.
We are running a special on the Low Seat Pans for $100 (retail is $160) this special will go till this Sunday night. Please understand this is a pre-order special and product is in production as we speak.
Email or call us to reserve your Honda Fury Low Seat Pan today!!




Note, the Duel air intake above... coming soon!

[Fury#16]

Great work guys!!! Email sent.

[mrbyber]

Now that looks good. Looks like it is part of the bike and not just sitting on top.
I might have to put my C&C on ebay.
I would also think you could buy the pan and get it foamed and covered all for $300 or less. Good deal. Especially for having the best looking out there now. Nice work.

[Toadster]

Very nice. I really like it. I may have to sell my seat and get this one too. I would imagine it is not the most comfortable though.

[Clintster442]

I forgot to ask, are you guys familar with the T-Mod? It is a mod that cuts the rear fender support struts which changes the angle of the rear fender to a flatter position and lowers the back of it about 2 - 3" depending on the cut. This mod changes the angle of the rear fender and has created some issues with seats for some, not so much with the stock seat but quite prevelant with the C&C and Corbins. Since your seat pan sits so low and 'tight' to the bike and looks to tuck under the tank in the front, do you foresee an issue with this pan for those of us with the T-Mod?

Here are a few links to what the T-Mod looks like and does to the seat mount surface:

My newest mod
Tony's Mod - Lowered my Fury 2"

[Low and Mean]

Originally Posted by Clintster442

I forgot to ask, are you guys familar with the T-Mod? It is a mod that cuts the rear fender support struts which changes the angle of the rear fender to a flatter position and lowers the back of it about 2 - 3" depending on the cut. This mod changes the angle of the rear fender and has created some issues with seats for some, not so much with the stock seat but quite prevelant with the C&C and Corbins. Since your seat pan sits so low and 'tight' to the bike and looks to tuck under the tank in the front, do you foresee an issue with this pan for those of us with the T-Mod?

Here are a few links to what the T-Mod looks like and does to the seat mount surface:

My newest mod
Tony's Mod - Lowered my Fury 2"

Our Honda Fury Low seat pan should fit the Tony mod. I'm very familiar with this mod and I do not see and issue, mostly because of how our pan snaps to the fender. We are working on a video right now to show more look for this by next week.
LM

[ejracing]

Wow that look great.. is it possible to order one just like that with the pads???
and if so how much would it be?? thanks....

[Clintster442]

Email for order sent.