Honda Fury Forums: Honda Chopper Forum - View Profile: furion

furion furion is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 9 of 9
  1. Hansen Fury
    06-30-2012 09:54 PM - permalink
    Hansen Fury
    Sorry I missed ya. I left for Blowing Rock on the bike Friday. Got home just a little while ago. Rode the Blue Ridge for a good while. Insterstate felt like crap, it was hotter than hell.
  2. abonet
    06-04-2011 11:22 PM - permalink
    bill, i'm going to bring you prototype fender and bags to dragon ride you test out and we'll work something out later on products. i'll paint silver fior you. do you want lisence plate molded and run turn brake?

  3. taffyspop
    02-25-2011 03:00 PM - permalink
    Have not blocked the pair valve off yet. Concerned about the NC emissions inspection. Would probably fail with the pair valve blocked. Don't know. Have read on the forum where that does help with the popping and backfiring on decel so may have to do it. Wondering if I'm running too lean. Got to get the fuel mgt. I do my own oil and rear end fluid changes, but that's about it. Want the canella bar risers. Probably need valves adjusted also, especially if I'm running too lean. I may check out Danville Honda, but if you know anyone who would be interested in installing my bar risers and fuel mgt, let me know. I'm a little OCD about my bikes appearance, so would want someone who is good at what they do and careful about not doing any comestic damage.
    Guess I'm a little overboard about the Fury's appearance, but it was a big investment and I want to keep it cherry!! Have you blocked off your pair valve ? Saw pics of your Fury. Looks really nice. .
  4. taffyspop
    02-25-2011 10:12 AM - permalink
    Sure did not know I had two other Fury riders within spitting distance of me. Mine is a red one with some custom airbrushing. Lots of Mods I want to do, but am not a wrench, so will need some help. Don't care for the Honda Dealers here in GSO. Want forwards, Risers, FC. Have Bub JugHugger exhaust. Getting a lot of popping on decel. Plan on leaving for the Dragon on Friday in time to meet up with the group in Statesville. Going to meet at Hooters in Statesville and ride up as a group. You and Mike need to join in. We could ride from GSO to Statesville on I-40 and meet the others. Good talking to ya Bill. Let me know where you guys hang and maybe we can get together before June.
  5. taffyspop
    02-25-2011 09:53 AM - permalink
    Hey. Jim Foy here in Greensboro. Post name is taffyspop. Can you tell me a little more about the tricky ricky ride in June. I've had my Fury about 6 months now. Already 7500 miles. Would be interesting in doing the ride. Sounds like it's for a good cause. Are you going to the Dragon with us in June? Thanks for the info...
  6. furion
    01-31-2011 01:18 PM - permalink
    no problem shoot pics to my email ,
  7. abonet
    01-31-2011 12:29 PM - permalink
    working on it now. i hope to have complete for daytona. production ready in april. can you hold out. i'll send you some mock up pics in a week or so.

    thanks for the interest.
  8. MyFuryRide
    08-17-2010 10:29 AM - permalink
    have you stiffened the preload on the shock when riding 2? if you have. it might be the the tire being taller then factory, my combine weight with 2 is 275lbs. weight plays a major roll also
  9. MyFuryRide
    08-16-2010 08:27 PM - permalink
    I was running the stock 200/50/18, couple flats later...... I now running mezt 210\40\18, it does have more clearance but not sure i like the low profile look might get rid of it and go back stock. did you measure height before you rewelded??? how much did you drop at the taillight?? have you done anything to the shock?


Total Posts
Visitor Messages
General Information
  • Last Activity: 09-30-2014 04:06 PM
  • Join Date: 08-12-2009
  • Referrals: 0


Showing Friends 1 to 10 of 16


No results to display...


No results to display...
For the best viewing experience please update your browser to Google Chrome