Honda Fury Forums: banner
Add bookmark
Rear single piston NON-ABS caliper for reference.

Rear single piston NON-ABS caliper for reference.

  • 0
  • 0
Rear single piston NON-ABS caliper for reference.

Rear single piston NON-ABS caliper for reference.

  • 0
  • 0
Front dual piston NON-ABS caliper for reference.

Front dual piston NON-ABS caliper for reference.

  • 0
  • 0
Front dual piston NON-ABS caliper for reference.

Front dual piston NON-ABS caliper for reference.

  • 0
  • 0
Pic of the new 3 piston front ABS caliper installed. Note the 2 brake lines for the linked brakes.

Pic of the new 3 piston front ABS caliper installed. Note the 2 brake lines for the linked brakes.

  • 0
  • 0
Pic of the front 3 piston ABS caliper installed.

Pic of the front 3 piston ABS caliper installed.

  • 0
  • 0
Pic of the new dual piston rear ABS caliper installed.

Pic of the new dual piston rear ABS caliper installed.

  • 0
  • 0
Pic of the larger dual piston rear ABS caliper installed.

Pic of the larger dual piston rear ABS caliper installed.

  • 0
  • 0
This is the ABS foot master cylinder. It has a slightly larger diameter bore and piston than the non-ABS because it is operating both front and rear b

This is the ABS foot master cylinder. It has a slightly larger diameter bore and piston than the non-ABS because it is operating both front and rear b

  • 0
  • 0
Proportioning valve located in the factory location. Honda calls this part a PCV (pressure control valve).

Proportioning valve located in the factory location. Honda calls this part a PCV (pressure control valve).

  • 0
  • 0
ABS parts painted and ready to install.

ABS parts painted and ready to install.

  • 0
  • 0
ABS brake pads painted.

ABS brake pads painted.

  • 0
  • 0
ABS brake pads ready for paint. Front pads on top, rear pads on the bottom.

ABS brake pads ready for paint. Front pads on top, rear pads on the bottom.

  • 0
  • 0
The ABS calipers and brackets all ready for paint. Note dual piston rear caliper on the left and 3 piston front caliper on the right. The center pisto

The ABS calipers and brackets all ready for paint. Note dual piston rear caliper on the left and 3 piston front caliper on the right. The center pisto

  • 0
  • 0
I cut the ABS front caliper bracket and removed the portion that normally secures the wheel speed sensor since I don't have an ABS computer it is unne

I cut the ABS front caliper bracket and removed the portion that normally secures the wheel speed sensor since I don't have an ABS computer it is unne

  • 0
  • 0
Stock ABS front caliper bracket before cutting.

Stock ABS front caliper bracket before cutting.

  • 0
  • 0
Kbuskill

Bigger Brakes Conversion

I upgraded my brakes to the bigger calipers from an ABS Fury and also linked the brakes the same as an ABS. Now the hand brake lever operates the front brake and the foot lever operates both front and rear through a factory pressure control valve (proportioning valve). I just don't have an ABS compu
Click to expand...
There are no comments to display.

Album information

Album owner
Kbuskill
Date created
Item count
16
View count
145
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Kbuskill

Kbuskill

Media items
78
Albums
7
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top