Honda Fury Forums: banner
Cancel

Added the Accent Lights to the spoiler

Jump to Latest Follow
1 - 20 of 22 Posts
6

· Premium Member
Joined
·
1,965 Posts
Discussion Starter · #1 ·
I added the Honda Accent Lights to the spoiler last night.
What a nice touch it adds to the lights at night.

I was concerned as to why these two LED Accent lights cost so much.
Once I received the components and began installing, then I understood why.
They provided a power regulator that is mounted within the spoiler with the two LED lights. A factory wiring harness that routed perfectly to the fuse box.
The wiring harness has double fuse protection with a 2 amp fuse inline and a 10 amp fuse for the fuse box.

Last but not least, directions on what components to remove to accomplish the installation.. Great directions.. :cool:

Anyway, thought I would pass that on...
 
3

· Registered
Joined
·
81 Posts
#2 ·
Thank you for the pleasant review of a Honda accessory and we all know quality when you hold it!

I will get that next!!


How was the light at night time? Do those 2 led light up road at all?


Nothing negative so far!:D
 
6

· Premium Member
Joined
·
1,965 Posts
Discussion Starter · #4 ·
LATWIS said:
Thank you for the pleasant review of a Honda accessory and we all know quality when you hold it!

I will get that next!!


How was the light at night time? Do those 2 led light up road at all?


Nothing negative so far!:D
Click to expand...
They light up the road pretty good. They light up a little past the front of the the tire.

I will get some pic's tonight.

I already had the spoiler installed, so I had to remove it to add the lights. The instructions assumes your adding the spoiler and the lights.
It also provides the grommets which was unused since my spoiler already had them installed.

You basically have to remove the following:
Right & left foot peg steps
Spoiler
Crankcase cover
Left & right side covers
Tie wraps provided to secure the wiring harness
Took about an hour to install

They provide a bright while light on the ground in front of the tire..
 
K

· Registered
Joined
·
65 Posts
#9 ·
can you shut the spoiler lights off ?

tony_fury said:
How ironic, I did the same thing yesterday at lunch..
The yellow headlight needed to match the white LED's so now I'm happy with the lights..
Click to expand...
I was just wondering if you can shut the spoiler lights off ? Also, can you change the color of the spoiler lights to red or blue by changing the l.e.d. bulbs ? thanks, dave
 
Scratch

· Registered
Joined
·
314 Posts
#11 ·
kingdave said:
I was just wondering if you can shut the spoiler lights off ? Also, can you change the color of the spoiler lights to red or blue by changing the l.e.d. bulbs ? thanks, dave
Click to expand...
I fabbed my own LEDs and mount for the spoiler and used red ones. I live in Illinois and it's illegal to ride with forward facing red or blue lights. I haven't been stopped, but I know the vehicle code and have accepted the possibility of having to pay for a ticket if I get stopped. Know the law in your state before you change the LEDs. I didn't check it out until after I made this thing and considering the work I put in to it, I didn't want to take them off.
 
ABCFury

· Registered
Joined
·
15 Posts
#15 ·
Must be nice to be mechanically incline. I'm also planning on getting the led lights installed but it seems complicated and need specific instructions so I can share it with my buddy mechanic. Thanks in advance.
 
6

· Premium Member
Joined
·
1,965 Posts
Discussion Starter · #16 ·
ABCFury said:
Must be nice to be mechanically incline. I'm also planning on getting the led lights installed but it seems complicated and need specific instructions so I can share it with my buddy mechanic. Thanks in advance.
Click to expand...
ABCFury:
I sent you a PM with my number, call me if you have questions or you need to bounce something off me.

The instructions included with the LED Accent Lights are really good.
The wiring harness also has blue tape on it in area's that it needs to be ty wrapped to.
If you already have your spoiler installed, you can skip the grommet instructions since they are already installed on the spoiler.

Believe it or not it was real simple and the directions are included in the box with the LED Accent Lights.

You have to remove the two bolts (each) for both the shifter and brake forward controls.
No need to remove the hex allen screws on each side of spoiler, you only remove the hex allen screw on the bottom of the spoiler.

You have to remove the following:
Right & left foot pegs (2 bolts each, lay the shifter linkage and horn off to the side)
Spoiler (Bottom hex screw not the side hex screws)
Crankcase cover (left side rear. it's 1 screw and snaps out like the side covers)
Left & right side covers
Tie wraps provided to secure the wiring harness

The instructions provided with it shows you where to mount the regulator (in the spoiler), then run the wiring harness under the left bottom of the bike then up and across to the fuse box. The fuse box slides out easily. It includes a fuse box connector that snaps in the aux slot and fuse.
Took about an hour to install.

It really isn't that hard, take your time and follow instructions.:)
It does include picture diagrams
 
C

· Registered
Joined
·
1,111 Posts
#17 ·
I also fabbed up some red LED lights for my spoiler. I wanted them to match the red LED's I have everywhere else. Spent $20 on a 4 pack of step lights in red and made them fit. Just waiting for my grill from Irate to install everything together.
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
About this Discussion
21 Replies
13 Participants
Last post:
695
Honda Fury Forums:
FuryForums.com is the premier Honda Fury community to discuss the motorcycle’s specs, accessories, parts, reviews, and prices. Join now!
Full Forum Listing
Explore Our Forums
Honda Fury General Discussion Fury Appearance Fury Tech and Performance Chat New Member Introductions Honda Fury For Sale
Top