Barring last minute additions, painting should be pretty much complete. Elected not to paint the rear rim yet because I want to make sure the paint will hold up to the temp of a hot rim. Plus, when I get my 240, I can paint it then cuz im down to only one can of 2 stage clear left. Few spots on the frame and such need a touch up and I still have yet to do the calipers but main paint work is finished. Just need to clear coat these last pieces.
Next I'll get the tire back together and reinstalled. Then pull the radiator, replace and flush it, do the plugs, oil change and block off plates/plug. Then it's probably on to getting the driving lights hooked up (only the headlight is wired rn) and rerouting the brake/tail light wiring. Gonna install my diode and sequential signals and I ordered some grips. Probably wire up most of the light kit and put it all back together as I go.
I'm excited to get it together because unlike all of you, I have only about 15-20 minutes of experience riding this beautiful machine. Thats gonna change very soon!
Next I'll get the tire back together and reinstalled. Then pull the radiator, replace and flush it, do the plugs, oil change and block off plates/plug. Then it's probably on to getting the driving lights hooked up (only the headlight is wired rn) and rerouting the brake/tail light wiring. Gonna install my diode and sequential signals and I ordered some grips. Probably wire up most of the light kit and put it all back together as I go.
I'm excited to get it together because unlike all of you, I have only about 15-20 minutes of experience riding this beautiful machine. Thats gonna change very soon!
