Honda Fury Forums: banner

1 - 20 of 20 Posts

·
Registered
Joined
·
207 Posts
Discussion Starter #1 (Edited)
First and foremost I just want to throw out a big 'THANK YOU' to everyone on here that has ever posed a pic, mod, DIY, tinkered, puttered...you get the idea. RSS, TonyFury, Tony, Gar, Richard, WildBill, Predator....and the list goes on and on and on.....:D

So I finally got home from out of town and just hunkered down in my garage for the last 2 days and got at it.

There are a few more things that I want to get painted, like the rear hub, arm and dust ring (black). I have always had the mindset of "less is more". However, the weather is too nice and I just want to ride. :)

Here are some pics of what I have done thus far. Just a quick note, to those with the matte or black bikes, painting the kick stand black was a really quick and easy mod that cleans up the bike a bit.

I'm not sure if Matte is the fastest, but it sure is the sexiest!:D

Fury1.jpg

Fury2.jpg

Fury5.jpg

Fury6.jpg

Fury7.jpg
 

·
Registered
Joined
·
207 Posts
Discussion Starter #4
Damn, all of that in two days? You are the man!
Well, it was actually only about a day and a half....but the one day was a VERY LONG day :)

Haha, Gar's got a sweet spider bike! He's got his bike now too. Can't wait to see it, although I'm sure if the weather is good on the coast then he will be like me and just ride ride ride :p
 

·
Premium Member
Joined
·
13,705 Posts
im tickled for both you guys.just ride safe and have fun.
 

·
Registered
Joined
·
207 Posts
Discussion Starter #7
looks like someone lowered the rear fender...LOL
Haha, perhaps:D....wonder where that idea came from :rolleyes:

I'm not sure when I will be heading up to Edmonton but I will PM you for sure before I do.
 

·
Premium Member
Joined
·
13,705 Posts
i see the av changed gar.have fin guy.you got sum kechin up to du.
 

·
Premium Member
Joined
·
749 Posts
Haha, perhaps:D....wonder where that idea came from :rolleyes:

I'm not sure when I will be heading up to Edmonton but I will PM you for sure before I do.
Sounds good. I have never ridden with another fury yet. …….. And your bike is looking sweet.
 

·
Premium Member
Joined
·
749 Posts
Start a poll.
  1. I have done Tony's lower fender mod.
  2. I plan to do the fender mod in the near future.
  3. I'm thinking about it but still undecided.
  4. I have installed the L&M lowering spring.
  5. I have lowered the fender and the spring.
  6. I have installed the Sumo-X 250 kit.
  7. I'm saving up for the Sumo-X 250 kit.
  8. I am keeping my rear fender, spring and tire stock.
  9. I'm undecided or really confused and dont know what I want.
Well I think I fall under #9
 

·
Premium Member
Joined
·
1,970 Posts
canoesmasher:
The bike looks good man, I think the post got off track a little here.
I like what you done, looks great..:cool:

Now get on your bike and ride...:D

T
 

·
Registered
Joined
·
207 Posts
Discussion Starter #17
How did you paint the kickstand black? your bike is really nice....can i drop mine off and have you do all the same mods???
Hey Easy,

Doing the kickstand was easy. Obviously I took it off the bike when I had the bike up and the front tire off when I was painting the forks. I got my paint match from color rite, black (to match the frame). All I did was give it a shot of primer (oh, and I did not sand it as it is a rough finish already) and about 10-15 mins flash time between coats (I gave it thin coats), about 5 coats total. The only thing is, on the bottom of the kick stand, obviously the paint is going to scrape off when you put your kick stand out and park your bike. I am looking for something really thin (and black) that I can glue on the bottom of the kick stand that would hold up from the kick stand scraping on the ground when you park your bike. I was thinking about cutting up a hockey puck and gluing a piece of it to the bottom of the kick stand, but we will see.
 

·
Registered
Joined
·
2,153 Posts
.......I was thinking about cutting up a hockey puck and gluing a piece of it to the bottom of the kick stand, but we will see.
Consider a thin piece of Delrin (black), shaped and held on with 3M Contact Cement.

Cheers
 
1 - 20 of 20 Posts
Top