Joined
·
13,988 Posts
bluedragon i hope this helps.you can do this with or without the side spike.
fork covers
1 - 10 of 10 Posts
Joined
·
6,029 Posts
Is that the Kury cover with some spike bolts attached to it? Looks pretty good actually, may have to steal this idea...
Joined
·
832 Posts
Very nice! I didn't know anyone made those caps! Baron's made them for the Yamaha Raider, who makes these?
Joined
·
13,988 Posts
i got the fork covers and the spike nuts from ebay.put the covers in place and marked to drill for the spikes.used countersunk 5/16 by 3/4 in long bolts with threadlock to hold the spikes on.drill from the outside then countersink the inside.mark the cover so the hole is reven with the axel bolt.dun
Joined
·
6,029 Posts
Yea, it's Barons, misspoke as Kury makes all of our other things it seems... but, figured out what 460 did as soon as I saw it... sorry bout that Blue Dragon...
Oh, still looks good 460, nice & thanks for the idea...
Joined
·
5 Posts
baron bullet fork cover
I like those baron fork cover. Do you have problem installing them on your fury? What's the part number? The reason I ask is that I emailed Baron about the BA-7800U and here is the reply from them:
"Not without a little modification.....they are a little snug on the fury,and I had to remove a little material on the inside to make them fit.Whether or not we are going to do a fury specific version is still up in the air"
I like those baron fork cover. Do you have problem installing them on your fury? What's the part number? The reason I ask is that I emailed Baron about the BA-7800U and here is the reply from them:
"Not without a little modification.....they are a little snug on the fury,and I had to remove a little material on the inside to make them fit.Whether or not we are going to do a fury specific version is still up in the air"
Joined
·
4,474 Posts
To save a couple of dollars the fork covers for the Honda VTX 1300 will fit the fury forks but you will just have to change out the fork pinch bolts because the stock ones stick out a little further preventing the caps to fit properly.
Joined
·
13,988 Posts
i didnt do anything but slip them on.very close but no problems.
1 - 10 of 10 Posts
