Honda Fury Forums: banner

1 - 20 of 33 Posts

·
Registered
Joined
·
773 Posts
Discussion Starter #1
Hello all, We finally got our Honda Fury and we are very pleased. We did a short review of the bike, check it out at>>>
YouTube - Honda Fury from Low and Mean

Stay tuned as we will be doing more videos on this Nice Bike in the weeks to come.

Thanks for checking us out!
LM
 

·
Registered
Joined
·
136 Posts
Yeah its sounds good at the end.
 

·
Premium Member
Joined
·
518 Posts
Also agree about the sound at the end.... tweaked exhaust or just the mic on the camera?

I feel bad how dirty my bike is from riding down gravel roads and through puddles after hearing "clean" used so many times in the review :p
 

·
Registered
Joined
·
773 Posts
Discussion Starter #6
Hey guys, the bike is still stock, the difference in sound is because of the mic in the photo studio. Do any of you have an issue with the exhaust being quite at higher speeds? We could even here the motor and didn't know what gear we were in without feeling the torque. We have some examples of exhaust pipes on our site >>>>Honda Fury Nice Bikes

Let us know what you think.
LM
 

·
Registered
Joined
·
427 Posts
Low and Mean, please tell me your gonna make a set of black pipes, or black and chrome mix.
 

·
Registered
Joined
·
773 Posts
Discussion Starter #13
Yes, we will have these pipes available in Black, Silver, and Chrome. Of course these pictures are photoshopped on, so realisticly these pipes will be available around August. Right now we are working on breaking in the bike, creating a couple more videos, start planing out all the product we will make, and in the future we will be sponsoring this site with product for you guys.

LM
LowandMean.com: Custom METRIC Cruiser Parts!
 

·
Registered
Joined
·
521 Posts
Low and Mean,

Fianally got on a computer that would allow me to watch the U-Tube review. Nice job on pointing out the side cover removal.

What are the chances of you guys designing a set of pipes that run from the cylinder straight out the back like the Rinehart 2 into 2 system pictured here on my 1800?

 

·
Registered
Joined
·
201 Posts
The more I look at the pipes... the more I notice how ugly the rear of the bike looks with the rear arm exposed like it is. :\
I agree TOTALLY with DeadSpider on this statement. Low and Mean,can you take this concern in account in your develeopment of pipes for our bike that will COMPLIMENT the rearend for those of us that would love to purchase your pipes but not at the expense of giving up that rear arm exposure.Thanks.
 

·
Premium Member
Joined
·
518 Posts
I agree TOTALLY with DeadSpider on this statement. Low and Mean,can you take this concern in account in your develeopment of pipes for our bike that will COMPLIMENT the rearend for those of us that would love to purchase your pipes but not at the expense of giving up that rear arm exposure.Thanks.
I like how the stock pipes are routed and go back to the rear arm.... but from the meeting point [where both pipes meet in parallel] that's where it could differ. Perhaps end towards the end of the arm, not to extend past.
 

·
Registered
Joined
·
136 Posts
I agree with deadspider also. I loved the look of the exhaust on my old 1800. Man I got to admit I kinda miss the old 1800:(
 

Attachments

·
Registered
Joined
·
136 Posts

·
Premium Member
Joined
·
518 Posts
We will look into this style of pipes and come up with another design. Thanks for your feedback.

Thanks for checking us out!
LM
LowandMean.com: Custom METRIC Cruiser Parts!
Don't get me wrong...the pipes yall have shown are freaking sweet... just it leaves the rear arm sticking out all alone looking like a stock bar of iron with a wheel attached to it.... not yalls fault for it looking like that.... I am sure some people don't mind at all.


Here is my 1337 Paint Skillz.... my thought about where the pipes should end about.
fury-p1.JPG
 
1 - 20 of 33 Posts
Top