Honda Fury Forums: banner
1 - 10 of 10 Posts

·
Premium Member
Joined
·
263 Posts
Discussion Starter · #1 ·
I'm a pretty tall guy (6'4") and find I have to bend over more than I should to be able to grip the handlebars. I want to install lifters to allow me to sit up straighter and still have a grip on the bars. I bought 3" ones, but don't know if using them will require me to change brake and clutch cables.

Anybody install lifters? How long a set of lifters were you able to install without changing the cables?
 

·
Premium Member
Joined
·
749 Posts
All the cables will be long enough. The only thing I had to do was remove some of the clips on he handle bars (holding cables and wires) . I also removed the cork screw looking brackets under the trees
 

·
Premium Member
Joined
·
801 Posts
All the cables will be long enough. The only thing I had to do was remove some of the clips on he handle bars (holding cables and wires) . I also removed the cork screw looking brackets under the trees
I dunno I installed 2 in risers and it was pretty tight - not sure if three will work...:(
 

·
Registered
Joined
·
500 Posts
Ditto

mine are the 3" and it is tight
Never quite been happy with some of the re-routing I had to do looks-wise, but it all works fine. Just tight.

That said, the 3" risers were maybe the best mod I made; bike *really* has a choppery feel now, compared to the low-down varmint position the bike comes with :)
 

·
Premium Member
Joined
·
13,741 Posts
Never quite been happy with some of the re-routing I had to do looks-wise, but it all works fine. Just tight.

That said, the 3" risers were maybe the best mod I made; bike *really* has a choppery feel now, compared to the low-down varmint position the bike comes with :)
aint sure about varmit,but i love low down.keep the rubber on the ground.
 

·
Registered
Joined
·
13 Posts
Hey do you have a photo? I am thinking about the same thing only if it improves the ride. Like you I am tall in the saddle -saw 2 in ones online - but it looked like it blocked the gas cap
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top