Honda Fury Forums: banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
13,933 Posts
take a peice of 1/4 inch steel,make a little better than a 90% bend in it 1/2 inch long.put a pair of vice grips on the tube.hook it in a hole inside the baffle,tap the grips with a hammer and they will come out.make sure you pull the two screws out.good luck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top