Honda Fury Forums: banner
1 - 20 of 49 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter · #1 ·
so i got my low and mean rear fender a couple days ago! first off i must say that this fender looks amazing on the bike!, hats off to low and mean for the design standpoint. the lines all flow into the frame perfectly, and the way it "hugs" the tire is very clean. i also ordered the rear brake light/turn signal strip for $115 (you can either choose clear or smoked lens). the led strip sits right in that little bump towards the end of the fender, keeping that very clean and stealthy look :D ill have to wait a bit before i can get the fender painted (need to save some cash up). but i wanted to put up some pictures so other people can get an idea of what it looks like.

also on a side note, my fender arrived with a small crack on one side.... seems the plastic gets really thin where it meets the frame. this was quite disappointing to my eyes. other than that, props to low and mean!













 

·
Premium Member
Joined
·
6,191 Posts
Nice Bro! That looks sweet actually!!! Can't believe you got the demo bro, awesome! From the looks of it, if you lower the back end a little bit... it will ride parallel to the tire and look even better...

Sorry bout the crack! Since you're saving for a paint job anyways, send it back to them or get another to trade out for that crack. Talk to Chris, pretty sure he'll help you out! :D

Anyways, that looks good, can you take a pick of the whole bike though, so we can see it from an angle further back to get a better feel for it...?( full on side shot from about 15 feet on both sides would probably do with that resolution you have)

Oh, if you need instructions on installing that back LED for some reason... check out my vid on it... you know where to find it...
 

·
Premium Member
Joined
·
4,475 Posts
Did I miss something? I didn't know this rear fender was ready for sale yet and the last I new they were getting ready to offer them up. Is this fender available to be purchased yet and whats the cost? Does your bike have the the lowering kit on it or is fender on the the bike with no rear mods?
 

·
Registered
Joined
·
3,403 Posts
Did I miss something? I didn't know this rear fender was ready for sale yet and the last I new they were getting ready to offer them up. Is this fender available to be purchased yet and whats the cost? Does your bike have the the lowering kit on it or is fender on the the bike with no rear mods?
They replied to my email two days ago saying the rear fender was almost ready to go on the market?
That's why I asked him how the hell he got it?
 

·
Premium Member
Joined
·
6,191 Posts
Did I miss something? I didn't know this rear fender was ready for sale yet and the last I new they were getting ready to offer them up. Is this fender available to be purchased yet and whats the cost? Does your bike have the the lowering kit on it or is fender on the the bike with no rear mods?
Looks like no rear mods, but I'll let him answer that...

I agree with you on the cost, would be nice for those interested though!
 

·
Premium Member
Joined
·
4,475 Posts
Looks like no rear mods, but I'll let him answer that...

I agree with you on the cost, would be nice for those interested though!
I know its no problem with this fender and the lowering kit but wondering if this fender would fit properly without issues for those who now have the Tony tail. Maybe Chris will post up some additional info on this fender
 

·
Premium Member
Joined
·
6,191 Posts
I know its no problem with this fender and the lowering kit but wondering if this fender would fit properly without issues for those who now have the Tony tail. Maybe Chris will post up some additional info on this fender
I called him... Hopefully we will get a response to some of the questions, got his answering machine... Considering the lowering method as far as inches are concerned (1.5") are almost exactly the same, I don't see why this wouldn't work with the new fender... Unless you did both methods (spring, plus Tony mod), then that would be the only time to wonder about the height of the fender...
 

·
Premium Member
Joined
·
4,475 Posts
Price would help,I want to order the front and rear fender,just need an idea of cost so I'll know if the wife is going to be mad or MEGA pissed.
Tex. don't worry about the wife tell her to join my new online forum I'm starting up for the woman called I'm The Wife Of A Fury Owner. There will be a monthly contest like we have here to see who's the biggest asshole of the month and who's wife is pissed more. I've got charts showing who is in and out of the doghouse and how long each member has been sleeping on the couch and what monthly bill didn't get paid for your latest mod. I think its going to be a big hit!
 

·
Premium Member
Joined
·
1,582 Posts
Tex. don't worry about the wife tell her to join my new online forum I'm starting up for the woman called I'm The Wife Of A Fury Owner. There will be a monthly contest like we have here to see who's the biggest asshole of the month and who's wife is pissed more. I've got charts showing who is in and out of the doghouse and how long each member has been sleeping on the couch and what monthly bill didn't get paid for your latest mod. I think its going to be a big hit!
I'll be home in about four hours so I'll tell her about it.If you get a pm from me asking about it,it's from my wife.
 

·
Premium Member
Joined
·
6,191 Posts
I say your still good untill you see boxes on the front lawn with your cloths in you should be ok so go for it.
Boxes o... the boxes that we know... Let's put them put them on the front lawn and not neglect them so...

Boxes o... boxes understand the money situation o- so please...

Boxes o... boxes, you have my love for the urgent Fury need... ;)

Boxes o... boxes, give in to they wishes that you need... :D You shall know that I love you so, when thy box is coveted in thee... ;)

Boxes o... boxes, take me as you will... as you know thy box is so coveted still...

Boxes o... boxes you want to express thy loving need, but to understand thee we shall have to get on our knee's...

Boxes o... boxes, I understand thee... Understanding thy needs is to undestand the knee's...

Boxes o... boxes we shall soon see, that my loving is just as equal as thy need for speed... ;)
 

·
Registered
Joined
·
3,348 Posts
I know its no problem with this fender and the lowering kit but wondering if this fender would fit properly without issues for those who now have the Tony tail. Maybe Chris will post up some additional info on this fender
Dave, I dont think it will with out modifying. With Tony,s mod it does slightly change the angle and pitch of extreme front of fender. This fender has kicker legs which would not allow you to cantilever fender. The rear of Tonys drop 2 inches and you would have some of the inverse relationship on the front legs, by having to cut some off width. IMO
 

·
Registered
Joined
·
773 Posts
so i got my low and mean rear fender a couple days ago! first off i must say that this fender looks amazing on the bike!, hats off to low and mean for the design standpoint. the lines all flow into the frame perfectly, and the way it "hugs" the tire is very clean. i also ordered the rear brake light/turn signal strip for $115 (you can either choose clear or smoked lens). the led strip sits right in that little bump towards the end of the fender, keeping that very clean and stealthy look :D ill have to wait a bit before i can get the fender painted (need to save some cash up). but i wanted to put up some pictures so other people can get an idea of what it looks like.

also on a side note, my fender arrived with a small crack on one side.... seems the plastic gets really thin where it meets the frame. this was quite disappointing to my eyes. other than that, props to low and mean!













We have had a few guys call in asking about the new Honda Fury Rear fender and wanting to buy it now. It's available (The fender), but we have some other options that we have been working on to integrate a license plate that we have not finished (in till now). So before we start pumping them out we want to have all these items ready with video and pictures. The special Forum member price is $225 for the rear, Retail will be $295.
As for the crack, not sure what this is, but the first couple of fender are thin around the mounts for frame clearance. Anyone that has a issue with there's is welcome to exchange it for a new one. We offer a lifetime warranty on all of our products so don't worry about getting some piece of crap that will not out last your bike.
We are editing some footage and I hope to have a video of our Fury very soon.
Glad you guys like the fender, more coming soon.
LM
 
1 - 20 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top