[Fishman]

Puttin some Kury license plate LED (after the mod) and rear turn signals LED's on. Can one load equalizer make the signals not brink fast and if so where do I splice it (or 2) and can I get one at Radioshack(part # if anyone has it)? Should I wire the license plate lights to Aux terminal?
Thx

 

[Dave Maher]

Heres what you need led flasher relay

HONDA LED FLASHER RELAY (13-306): eBay Motors (item 370346484949 end time Jul-06-10 10:08:49 PDT)

 

[Snuffdog76]

yup what Dave said

 

[Clueless]

You should wire the lic light to the white connector under the rear of the fender. If you use load equalizers, splice them in at the same place, 1 to each light, DLP has them, but the electronic flasher is easier. http://www.directlineparts.com/search.asp

 

[BarFury]

You should wire the lic light to the white connector under the rear of the fender. If you use load equalizers, splice them in at the same place, 1 to each light, DLP has them, but the electronic flasher is easier. at Direct Line Parts

Agree, wholeheartedly; it don't get no better!

Cheers

 

[Fishman]

Thanks for the advise! So I understand the Honda flasher is the way to go, but will it equalize the turn signals and the License plate lights? Where do I place it and what do I splice it into. New ground for me - need all the advise I can gather.

 

[Led Sled]

Thanks for the advise! So I understand the Honda flasher is the way to go, but will it equalize the turn signals and the License plate lights? Where do I place it and what do I splice it into. New ground for me - need all the advise I can gather.

I dont think the plate is the issue the plug in Honda part needs no splice it goes in the fuse area, signal flash spot, then you dont need to cut anything I believe! It works for front and back.

Good luck

I have LED turn signals and I like the rapid flash, Kuryakyn load Eq didnt work for me, I spliced it in and it didnt go or work for both sides!!!!

 

[BarFury]

Thanks for the advise! So I understand the Honda flasher is the way to go, but will it equalize the turn signals and the License plate lights? Where do I place it and what do I splice it into. New ground for me - need all the advise I can gather.

The unit that Clueless and Dave Maher are referring to does not "splice-in"; it simply "plugs-in", in the same place as your existing stock unit, using the same type fittings and everything. I've got it and it works beautifully. It has nothing to do with your license plate light, which hooks-up just as normal. Make sense?

Cheers

 

[Fishman]

Thx Barfly & Sled - I am gettin there, but where is the unit it replaces located? Sorry to be dumb!

 

[Clueless]

Thx Barfly & Sled - I am gettin there, but where is the unit it replaces located? Sorry to be dumb!

Under the seat and rear fender, right side (as you sit on it) next to the frame, right at the side cover grommet, little black plastic box with a small 3 pin black connector into it..

 

[Fishman]

Thx Clueless, got it now with help from you guys!