[phlaug]

Any interest in keeping track of mod costs (both $ and time)? I realize that prices for everything is out there on the internet, but that's visiting a lot of sites. I would love to learn from what others have done by having a central list.

All I can contribute is:

MOD COST TIME
Corbin K&Q $545 (incl S&H) <30 minutes

(would have been even quicker, but I didn't have loctite, so did it twice and the seat wasn't quite bent enough, so I threaded it on without the spacer (but didn't tighten all the way) and drove it a few days to see if it would bend a little bit and then redid it with the spacer and tightened it hard, so it was about half an hour all in doing it three times)

Thanks for considering the idea!

 

[RedspawnSilver]

Yea, we have all thought about starting this kind of thread, just never really got into it much I suppose... I also have a relative number in the FAQ, for about 3000$ (that's with all the chrome trimmings, pipes and little mods), the bike will be modded the way you want it to be, minus paint jobs or anything to do with the rims.

You bought the more expensive seat, so your number will be slightly higher of course. I'm just waiting to see who actually does this... some guy's may not let their wives or girlfriends see this post too... lol

 

[Snuffdog76]

I am sitting just over 20k in total mods (excluding bike)

 

[RedspawnSilver]

I am sitting just over 20k in total mods (excluding bike)

Guessing that's to the wife?

 

[phlaug]

I am sitting just over 20k in total mods (excluding bike)

Can you break it down at all? Is that an accumulation of tons of little things? Or are there a couple key things you went all in on? Thanks!

 

[RedspawnSilver]

Can you break it down at all? Is that an accumulation of tons of little things? Or are there a couple key things you went all in on? Thanks!

Just for you, think this is all of them for me, now that I look at it.. think I'm done spending for a little while... lol Thank goodness all labor was done by me...

Hondaline Chrome Plated Rear Fender Panel 90
Sissy Bar 90
Sissy Bar Pad 90
Refabricated Seats 300
Pipes 700
grips 130
levers 85
mirros 85
side cover insignia 10
Kury clutch Perch 45
Kury master cyclinder cover 40
Both Switch box housing covers 70
Rear Brake cylinder cover 25
splined adapter 20
Kury Swingwings 145
Low and Mean Adapter for filter 165
Spike filter 165
Fuel Controller 265
xoprodox toe pegs 90
accutronix fork nut covers 90
Front LED assembly 120
Rear LED assembly 165
Timing cover 20
Clutch cover 30
small engine cover 22
engine kit 170
oil dipstick 30
Side mounted license plate 120
spike screws 10
Hondaline Chopper Front Spoiler 250
L&M spring 200
L&M fender 200
Irate Marty Grill 109
Paint 2400
Speedo 35
New Fender for mod 70
Front mounting satchel 35
Throw-over bags 119
L&M Rake kit 800
7605

 

[Richard1]

I have thought about doing this, but I’m afraid it would make me sick. I know I have over 20k in it. Wife just upgraded her wedding ring to about what I have in the bike, now I’m free to spend a little more.

 

[RedspawnSilver]

I have thought about doing this, but I’m afraid it would make me sick. I know I have over 20k in it. Wife just upgraded her wedding ring to about what I have in the bike, now I’m free to spend a little more.

I don't see how you guys put 20k into the bike... the Sumo kit and rims around what about 7k for everything? Then I have 7.6k alone in mine and that's with a paint job...??

 

[Richard1]

I may have to break it down. My cost includes labor also. We should also include all of the shipping of parts out to be worked on or exchange programs.

 

[RedspawnSilver]

I may have to break it down. My cost includes labor also. We should also include all of the shipping of parts out to be worked on or exchange programs.

Yea, my cost is without labor (besides paint which is mostly labor costs) and I padded up some of the costs for trade secrecy ... Most of my shipping was free too.. meh, guess I shopped around till I found free or next to free shipping though, I hate shipping costs... Still don't see the 20k... you guy's must be getting robbed on labor costs...!

 

[Snuffdog76]

This is all excluding the labor at 70.00 / hr

RC Wheels & new tires
RC matching rotors
RC bolts
Raw Tailight
LED ring turn sigs
levers
grips
mirrors
Everything that wasn't chrome was removed and chromed
honda red flame seats (both)
sissy bar with pad (pad stiched to match seats)
spoiler with HID lights
double flame LED kits (some installed inside engine head covers to glow red)
intake adapter
spike filter
new speedo LnM
lowering shock LnM
honda stainless steel lines (all 4)
billet dipstick
irate grill
front fender LnM (sitting here not installed till airbrushed)
PC5 with autotune
fork tube spikes
accutronix forward controls and matching passenger pegs
side mount rotateable blate bracket with LED plate cover shining into rear rim
I may have forgot minor things

still to do

Airbrush work 4.5k
Sumo X kit 4k
HP kit 1k
labor

So that will have me at over 30k in mods but nothing like taking it to events.

 

[CBSIMONSEZ]

^^^^ damn, thats nuts!

My turn ... if i can remember them all

chrome stock wheels - 1000
OEM Honda windscreen - 260
Kury iso grips - 56
sykel mirrors - 35
Irate grill - 175
Accutronix 3" forward controls - 775
Kury engine covers - 135
Pair valve block off - 15
Stebel air horn - 56
Cobra PowrFlo - 200
Cobra Fi2000 - 150
Fuggin Viper 2 - 800
Cobra rear cargo rack - 135
bike cover - 56
Disc lock - 50
LED turn signals - 50
Accutronix horizontal plate holder - 176
Dyna beads - 45
Aluminum valve caps - 10

grand total .. $4179 .. and im not done. I still have to chrome everything else on the bike, Tonys Mod, and Raw LED brake light. damn it adds up quick.

 

[2 Evil]

Jesus you guys spent some serious coin already. My list is too short to even post LMAO. I put in about a grand maybe. I rather not keep track like I did with my Harley because it makes me sick and I rather not eat pork and beans for the next few months.
CB if your going to attempt the rear Tony Mod, I would like to be there for the finish and maybe during. If you need help I can be there. Then we can do mine

 

[mental]

I'am having pork and beans tonight. And I don't have a Fury yet.

 

[BarFury]

I'am having pork and beans tonight. And I don't have a Fury yet.

Suggest switching to MRE's for a little variety! LOL.

Cheers

 

[Snuffdog76]

I knew I forgot something, cobra exhaust (no baffles) lol

 

[CBSIMONSEZ]

Jesus you guys spent some serious coin already. My list is too short to even post LMAO. I put in about a grand maybe. I rather not keep track like I did with my Harley because it makes me sick and I rather not eat pork and beans for the next few months.
CB if your going to attempt the rear Tony Mod, I would like to be there for the finish and maybe during. If you need help I can be there. Then we can do mine

actually, im glad you brought this up! You got any friends who can do this mod that you trust? Ill toss him a couple bux. My friend ( yeah, some friend ) was supposed to get this done for me over a month ago ... and he keeps putting it off. He is a wrench head, and has built several Rat Rods, but for some reason he is hesitant to get this done.

The one problem with getting the Tony Mod done, i know ill have to get the Raw LED tail to the tune of $200 clams .. that will lead to new LEDs up front ... spending more money.LOL Oh well, you only go around once i guess.

 

[CBSIMONSEZ]

The bulk of my list are things that had to be done. The forward controls ( no more sore knees ) .. the grips ( no more numb hands ) .. pipes ( you need these riding around NYC so as to be heard ). The other stuff is just bling that needs to be done.

I forgot to add my tool bag @ 25$

 

[Richard1]

1. Sumo-X 250 Tire Kit w/ Pointed Fender
2. Sumo-X Polished Intimidator Wheels
3. Sumo-X Side Mount License Bracket w/ Brake & Tail Lamps
4. Sumo-X Polished Swing Arm
5. Kuryakyn Zombie Pegs – Front (Rear Removed)
6. Kuryakyn Zombie Levers
7. Kuryakyn Scythe Mirrors
8. Honda Billett Clutch, Timing, and Master Cylinder Chrome Covers
9. Honda Billett Oil Dipstick and Fork Nut Covers
10. Honda Custom 'Vector' Seat
11. Honda SS Braided Throttle and Clutch Cables
12. Spiegler SS Braided Brake Lines (front & rear) with Chrome Banjos
13. Kuryakyn Lizard Lights
14. Kuryakyn L.E.D. Silver Bullets Front and Rear Turn signals
15. Cobra Swept pipes- Baffles Removed
16. Fi2000 Fuel Controller
17. Fuggin 90 Degree Air Intake
18.Kuryakyn ISO Grips w/Throttle Boss
19. Low & Mean Fork Extensions
20. Irate Radiator Grill
21. All Reflectors, Stickers, & Emblems Removed

This still does not include labor, parts such as Run/Turn/Brake modules, touch up paint, extended warranty etc. I will attempt to put prices to these shortly for an accurate accounting.

 

[Goat]

I'am having pork and beans tonight. And I don't have a Fury yet.

I like cutting up hot dogs and putting them in the beans.

Back to topic. I'm under $2,000.00 on mods and I'd really like to stay there. I can't even afford a can of pork & beans now. I am seriously short on cash. I'm broke and I'm done. My bike may be the closest to stock out of everyone in these forums, but I still love it.

Exhaust, intake, fuel controller, foot pegs, turn signals, seat.... I think that's pretty much it. It doesn't cost anything to remove stickers and reflectors.

Oh crap, forgot about the damn helmets that I never wear! That may have put me over $2,000.00, but then they really aren't part of the bike I guess.