Honda Fury Forums: banner

1 - 20 of 21 Posts

·
Registered
Joined
·
122 Posts
I use a PH6017A fram, same one my blackbird and several others use, saves me a trip the the dealer and it's a slightly larger filter. Advance auto has them all day long.
 

·
Premium Member
Joined
·
2,563 Posts
From the VTX board, I am not recommending any , but this is a listing that will fit Hondas

The following is a list of filter numbers that will work on the 1800 and 1300.
Motorcycle specific filters;
AC Delco PF2135
AMSOIL EaOM-103
FRAM PH6017A
K&N KN-204
NAPA Gold 1358
Purolator Motorcycle ML16817
STP 07
WIX 51358

Car filters about 2.5 inches tall;
AC Delco PF1237
Bosch 3300
Mobil M1-108
NAPA Gold 1365
Purolator L14622
Purolator Pure One PL14622
STP S-02876
WalMart SuperTech ST6607

Car filters about 3.25inches tall;
AC Delco PF-2057
Bosch 3323
Castrol 7317
FRAM 7317
Mobil 1 M1-110
Motorcraft Long Life FL-821
NAPA Gold 1356
Purolator L14620
Purolator Pure One PL14620
WIX 51356
 

·
Premium Member
Joined
·
13,719 Posts
i have a friend that works in a honda shop in richmond va.he said the 6017-a fram will cause low oil pressure at idle.i only use honda filters on my fury.
 

·
Registered
Joined
·
122 Posts
Ask him what the pressure difference actually is. Sorry hoss, but I don't buy it, the dealers had ya'll on the whole "limited edition" thing too, how did that work out?
 

·
Premium Member
Joined
·
13,719 Posts
never had me on limited edition.i bought the blue fury because i like the bike.i was not talking to a dealer,he is a personal friend,there was a three pound diff.at same milage and rpm.
 

·
Registered
Joined
·
158 Posts
I've only used honda filters for anything I've owned. be it my cars or my bikes. After I saw the cut aways of the OEM's vs. everything else I never looked back.
Same here. Some of the 'trusted name brand' non-OEM filters tried out in the filtering tests that I saw were atrocious. Honda factory every time for me. It's too important for to the service life of the engine.
 

·
Registered
Joined
·
2,153 Posts
I use the Purolator Pure One, #PL14610 (3.5"); it has more capacity (element surface area) than the OEM stocker. Fram's are junk!

Cheers
 
  • Like
Reactions: WI_Hedgehog
1 - 20 of 21 Posts
Top