Honda Fury Forums: banner
1 - 3 of 3 Posts

·
Registered
Joined
·
164 Posts
Discussion Starter · #1 ·
Hi all, over the weekend I removed the pillion peg mounts to get rid of Honda's abysmal effort at using up all their trail bike foot peg mounts.
Hack sawed off the "U" bracket and then ground the surface smooth and drilled a 1/2" hole through the center, a quick respray in black returned them to a gloss finish.
Fitted a pair of Kuryakyn Magnum Clevis's to the mounts, these only come in Harley 7/16 mounts so I had to also get a pair of ISO adapters to suit so I could remount the Mini Pilot footpegs.
They now tuck in much closer to the bike and you can lean them back so they clear the guard :)
These pictures should say it all:







 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top