[centex]

Any help would be appreciated. I drilled the center of the baffles out but I am having trouble gettin the baffles out. Sounds better but still not the sound im looking for. It looks like there is 2 weld spots holding them in can someone tell me do I need to drill thru the weld spots.

 

[Clueless]

Might try this, http://www.vtxoa.com/forums/showthread.php?t=229245

 

[PREDATOR]

You can follow this link --> Coppertone Exhaust

Pretty much what I had to do after I botched the baffle mod

End results came out pretty good though!

 

[centex]

Yea I seen your post on that Predator and was afraid I would really screw something up. Im presuming you welded the case back together.

 

[PREDATOR]

Yes, I rewelded it back together and applied another coat of high temp flat black paint.

 

[MAINEiak]

Any help would be appreciated. I drilled the center of the baffles out but I am having trouble gettin the baffles out. Sounds better but still not the sound im looking for. It looks like there is 2 weld spots holding them in can someone tell me do I need to drill thru the weld spots.

If you are doing Faceoff76's mod... http://www.furyforums.com/forum/fury-tech-performance-chat/141-exhaust-mod.html,
you don't actually remove the baffle. You just bore out the two 3/4" plates w/ the 2 holes that you see from the rear of the pipes. This effectively bypasses the baffle while leaving it in place. I removed mine with a 3/4" hole saw. Read my http://www.furyforums.com/forum/fury-tech-performance-chat/404-exhaust-mod-fix.html if you need to revert back.

 

[460brevill]

i put jardine slip ons on mine.nice rumble.

 

[centex]

i put jardine slip ons on mine.nice rumble.

can you post a pic and did they mount up to the stock pipes. I bought some slip on mufflers for the vtx1300 but they will not tighten down on the stock pipes.

 

[460brevill]

i put a pair of reducers on backward and welded them to the pipe.that makes both the same size then put a pair of side outlet jardine slip ons on it a tighten them down.iused a pair of chrome clamps.

 

[dumminysmith]

The different sites provided would surely be able to help a lot of people. Thanks to the internet, it is now very easy for everyone to learn something new.

 

[steve1234]

hello everyone.... I am new to this forum and I liked this post.... great responses form the senior members... really like it

 

[yesimawesome27]

Well then stick around, you'll love it here. Welcome!

 

[Toadster]

The different sites provided would surely be able to help a lot of people. Thanks to the internet, it is now very easy for everyone to learn something new.

I'm confused...

 

[Snuffdog76]

Internet mmmm, now that we have 3d tv I am wondering when we will have a scratch and sniff monitor lol