Honda Fury Forums: banner
1 - 20 of 36 Posts

·
Registered
Joined
·
710 Posts
Discussion Starter · #1 ·
Does anyone have these? I like the looks and sound. My only concern is will I be able to access the plastic "chrome" cover to adjust the "ride" on the adjustable shock absorber? I spoke with Samson today and they weren't sure on the question.

Thanks in advance.
 

·
Premium Member
Joined
·
6,191 Posts
Does anyone have these? I like the looks and sound. My only concern is will I be able to access the plastic "chrome" cover to adjust the "ride" on the adjustable shock absorber? I spoke with Samson today and they weren't sure on the question.

Thanks in advance.
Read sig... Look at my pics in the gallery... You can access the cover, it just doesn't slide off as it use to, you literally have to "slide" it out, instead of popping it out... Don't bother with the guys at Samson, I tried to tell them that the holes cut for the support bracket was cut wrong and he didn't quite understand... Make sure you have a Uni-bit handy or you're going to spend some hours like me installing, other than that... they sound great, most of the guys that went to the Ventura Chopper fest liked the way that they sounded... along with me of course, oh... and those damn baffles are hard as heck to take out... so hard, I just left them in there... lol
 

·
Premium Member
Joined
·
1,967 Posts
Does anyone have these? I like the looks and sound. My only concern is will I be able to access the plastic "chrome" cover to adjust the "ride" on the adjustable shock absorber? I spoke with Samson today and they weren't sure on the question.

Thanks in advance.
RedSpawnSilver has the Samson Warlord II - Hell Raisers Massive 2 1/2" and I have the WarLord II " Slashers" - Massive 2 1/2"

When you click on the link for the Slashers, those are my videos of the start up and drive by..
115-971 - Samson WarLord II Slashers - VTX1300 Exhaust Pipes for 2010 Honda Fury Motorcycles

I love the pipes and they sound great. I do have the baffles in.

If you talk to KC, tell him Tony said Hello...
T
 

·
Premium Member
Joined
·
6,191 Posts
RedSpawnSilver has the Samson Warlord II - Hell Raisers Massive 2 1/2" and I have the WarLord II " Slashers" - Massive 2 1/2"

When you click on the link for the Slashers, those are my videos of the start up and drive by..
115-971 - Samson WarLord II Slashers - VTX1300 Exhaust Pipes for 2010 Honda Fury Motorcycles

I love the pipes and they sound great. I do have the baffles in.

If you talk to KC, tell him Tony said Hello...
T
Lol, tell KC the same :mad:, cept James said hello ... I must have missed the name part in those pipes... my bad... :eek:
 

·
Registered
Joined
·
2,152 Posts
RedSpawnSilver has the Samson Warlord II - Hell Raisers Massive 2 1/2" and I have the WarLord II " Slashers" - Massive 2 1/2"

When you click on the link for the Slashers, those are my videos of the start up and drive by..
115-971 - Samson WarLord II Slashers - VTX1300 Exhaust Pipes for 2010 Honda Fury Motorcycles

I love the pipes and they sound great. I do have the baffles in.

If you talk to KC, tell him Tony said Hello...
T
Tony;

On the site, I saw the "Cannons", the "Ripsaws", and the "Slashers"; I didn't see the "Hell Raisers". What do they look like? Did they stop offering them?

Cheers
 

·
Premium Member
Joined
·
1,967 Posts
Tony;

On the site, I saw the "Cannons", the "Ripsaws", and the "Slashers"; I didn't see the "Hell Raisers". What do they look like? Did they stop offering them?

Cheers
If you go to their main page (samsonusa.com), select Honda and VT1300CX Fury 10-10 They are right below the baffle.
They look like the Cobra Swepts.
 

·
Premium Member
Joined
·
6,191 Posts
Tony;

On the site, I saw the "Cannons", the "Ripsaws", and the "Slashers"; I didn't see the "Hell Raisers". What do they look like? Did they stop offering them?

Cheers
Check out the Gallery, for my pics... I have a ton of pics on there of them :D

http://www.samsonusa.com/115-961.html

If you go to their main page (samsonusa.com), select Honda and VT1300CX Fury 10-10 They are right below the baffle.
They look like the Cobra Swepts.
Cept they cover up the swing arm a little less than the Cobra Swept's do IMO, also they are further away from the passenger pegs, was thinking about my lady as well when I bought them... that's why I picked them, they go with the flow of the bike better and when I sit on them, it covers up the swing arm better... they sound great too!

Here's another website where you can see them side by side as well...

http://www.metricthunder.com/Mercha...Code=Furyexh&gclid=CLSptMCRwJ0CFShGagodw17VjQ
 

·
Registered
Joined
·
2,152 Posts
Thanks Tony and RedspawnSilver. 'Preciate your comments.

Cheers
 

·
Premium Member
Joined
·
6,191 Posts
Me: "How the heck do you get out the old baffles???? I pulled with all my might, but couldn't get it out...."

btw, just got this from Samson:

"we use a slide hammer at times to jolt the old baffles out. make sure it is well lubed.
thank you,
JR

If you have any other questions please call.

Samson Motorcycle Products"
 

·
Registered
Joined
·
2,152 Posts
Redspawn and/or Tony:

Can you verify that your Samson's came with O2 bungs welded in, and if so, how far out from the exhaust port are the bungs located?

Cheers
 

·
Premium Member
Joined
·
1,967 Posts
Redspawn and/or Tony:

Can you verify that your Samson's came with O2 bungs welded in, and if so, how far out from the exhaust port are the bungs located?

Cheers
No they do not come with O2 bungs welded, nor do they advertise that for the Fury.
The Harley version of the pipes include them.
:Fury Version"
* Mounting hardware included
* Improves gas mileage
* Installer Friendly
* Awesome Deep Tone
* Exclusive Show Quality Quad Chrome Finish
* Removable Baffles
* Produces up to 20% or More Horsepower and Torque
* Ready to Install Right Out of the Box
* Removable Full Coverage Heat Shields
* Stepped High Performance Exhaust System.
* Also in Sinister Ceramic Black.
Harley Version:
* Mounting hardware included
* Improves gas mileage
* Installer Friendly
* Awesome Deep Tone
* Exclusive Show Quality Quad Chrome Finish
* Limited 1 year warranty
* Produces up to 20% or More Horsepower and Torque
* Ready to Install Right Out of the Box
* O2 Sensor Ports that Accept O.E.M. / Aftermarket Sensors
* Two Stepped High Performance Exhaust System

* Fits 2004 to 2010 Harley Davidson Sportster Motorcycles, , 2004 to 2006 models require O2 sensor plugs, purchased separately.
 

·
Premium Member
Joined
·
6,191 Posts
Redspawn and/or Tony:

Can you verify that your Samson's came with O2 bungs welded in, and if so, how far out from the exhaust port are the bungs located?

Cheers
WTH is an O2 bung? lol... Don't remember seeing one of those on there, I checked google to see what that was and again... don't remember it on there. Maybe the Great Tony_Fury can help :cool:
 

·
Registered
Joined
·
2,152 Posts
Perhaps an explanation/justification for my original question is in order. If you had O2 bungs welded in, about 1-to-2 inches from the exhaust port/s, and an adjustable fuel-controller, and one of these:

RSR Air/Fuel Ratio Gauge

you'd have no need for any dyno runs/testing. For about the cost of a dyno run or two, you can optimize, very accurately, your fuel mix for all points and modes in the powerband. When you're through tuning, you just un-clamp it, plug your O2 bungs, and put it on the shelf 'til the next time you make a change to your exhaust or intake system (not very often, I suspect).

Cheers
 

·
Premium Member
Joined
·
6,191 Posts
Perhaps an explanation/justification for my original question is in order. If you had O2 bungs welded in, about 1-to-2 inches from the exhaust port/s, and an adjustable fuel-controller, and one of these:

RSR Air/Fuel Ratio Gauge

you'd have no need for any dyno runs/testing. For about the cost of a dyno run or two, you can optimize, very accurately, your fuel mix for all points and modes in the powerband. When you're through tuning, you just un-clamp it, plug your O2 bungs, and put it on the shelf 'til the next time you make a change to your exhaust or intake system (not very often, I suspect).

Cheers
Huh... That would be pretty cool to have, but as Tony said, there is not o2 bung on it, went out during my break and looked at the pipes I have as well and didn't see it. Think they may have copied some wordage over from another item? Don't know, if you call the Metric Thunder guys though, they'll answer your questions... There's only like 3 of them in their office there, so it wouldn't be too hard for them to figure out what they did if any of them is admin on the site.
 

·
Registered
Joined
·
3 Posts
Sampson exhaust Warlord

Love the pipes. They make the bike sound as good as it looks. I agree on the mounting braket. I had to machine the holes a bit inorder to install the pipes on the braket. All and all the pipes are great. Sound alot better then cobra's tinney sound.
 

·
Premium Member
Joined
·
6,191 Posts
Love the pipes. They make the bike sound as good as it looks. I agree on the mounting braket. I had to machine the holes a bit inorder to install the pipes on the braket. All and all the pipes are great. Sound alot better then cobra's tinney sound.
Pics & which one did you get?
 

·
Premium Member
Joined
·
1,967 Posts
Love the pipes. They make the bike sound as good as it looks. I agree on the mounting braket. I had to machine the holes a bit inorder to install the pipes on the braket. All and all the pipes are great. Sound alot better then cobra's tinney sound.
Tazman:
I took it to the next level and welded a piece to their bracket to reach the second hole on the bike exhaust mount.
I emailed them mutt's to take the mod into consideration, I guess they didn't...
View attachment 1634
 

·
Premium Member
Joined
·
801 Posts
Love the pipes. They make the bike sound as good as it looks. I agree on the mounting braket. I had to machine the holes a bit inorder to install the pipes on the braket. All and all the pipes are great. Sound alot better then cobra's tinney sound.
When you remove the baffles, the cobra's sound AWESOME - Everyone asks what kind of bike is it, is it a harley, and when i tell them its a honda, they say bullshit...
 

·
Premium Member
Joined
·
6,191 Posts
When you remove the baffles, the cobra's sound AWESOME - Everyone asks what kind of bike is it, is it a harley, and when i tell them its a honda, they say bullshit...
Okay, we all have our own tastes in the long run... the Samson's sound great even with the baffle in (deeper, resonant kind of sound), but it's about how we feel about the look and sound of the overall pipes that matters in the long run, not who makes it.
 
1 - 20 of 36 Posts
Top