[Goat]

Am I the only one who broke the blinker housing at that little tab on the top when replacing the orange lense with the Kuryakyn lense? I was trying to be very careful, but I broke two of them; one while pushing in the new lense and one while trying to pull out the old lense! I like the bike; you couldn't hurt the engine with a nuclear bomb, but I'm so sick and tired of cheap plastic $hit! Why can't they at least use a higher grade plastic? If I can afford it in the future, my next bike may be a Harley if I can find one that looks half way descent. I think I'm gonna' be pissed about this as long as I own this Fury.

 

[695]

You might be the only one... kidding...
Plastic is the theme of this bike.. If every part was metal and chrome it would be the price of harley or big dog..

 

[woodenhorse]

I know what you mean about those little tabs...didn't break mine, but treated it like an eggshell.....I still haven't seated my back lenses totally flush...did you get yours seated okay in the back?

 

[Goat]

I know what you mean about those little tabs...didn't break mine, but treated it like an eggshell.....I still haven't seated my back lenses totally flush...did you get yours seated okay in the back?

Well, the one that isn't broken is seated just fine, but the other with the broken tab will probably never be seated, unless the glue that I plan on using will hold it strong enough.

 

[no_fury]

Steveo, it just gives you a reason to upgrade for some aftermarket units. I'm surprised so many people run the stock turns, it's one of those things that are first to get replaced next to grips and mirrors.

 

[Goat]

Steveo, it just gives you a reason to upgrade for some aftermarket units. I'm surprised so many people run the stock turns, it's one of those things that are first to get replaced next to grips and mirrors.

I think the Kuryakyn smoke lenses look really good on the stock housing. What other options do I have that don't cost a lot and are easy to change out?

 

[no_fury]

I think the Kuryakyn smoke lenses look really good on the stock housing. What other options do I have that don't cost a lot and are easy to change out?

I run Kuryakyn small halogen silver bullets and then are bright as hell. They use outdoor lighting halogen bulbs and it's so bright you can't really stare at them. Don't be fooled the more expensive LED version isn't brighter. I think there about 100 bones a pair but your going to need a bracket or clamps for the front.

 

[Goat]

I run Kuryakyn small halogen silver bullets and then are bright as hell. They use outdoor lighting halogen bulbs and it's so bright you can't really stare at them. Don't be fooled the more expensive LED version isn't brighter. I think there about 100 bones a pair but your going to need a bracket or clamps for the front.

Do you have any pics of the front ones? I didn't see any front blinkers on the pics that you posted for the "gig is up" thread.

Ah, I see them now, but I need a close up view. How would I mount those to my fury? When I said, "easy to change out", I mean really easy. I'm not good at making brackets or modifying stuff myself.

 

[no_fury]

Do you have any pics of the front ones? I didn't see any front blinkers on the pics that you posted for the "gig is up" thread.

Ah, I see them now, but I need a close up view. How would I mount those to my fury?

I might get chastised...but here you go:

They're mounted to a Kuryakyn headlight bracket which is flipped upside down on my setup.
http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=213780

 

[Goat]

I might get chastised...but here you go:

They're mounted to a Kuryakyn headlight bracket which is flipped upside down on my setup.
Kuryakyn Top Driving Light or Turn Signal Mounts - DennisKirk.com

Looks really good, but I don't see how to do it on the Fury. You're just gonna' have to do it for me.

 

[no_fury]

That bracket normally uses the same holes as the headlight bracket. I can't see why it wouldn't work on a Fury.

 

[no_fury]

You could also use these if you prefer the look.

Turn Signal Fork Clamps for Victory Motorcycles - Chrome Glow

 

[Goat]

You could also use these if you prefer the look.

Turn Signal Fork Clamps for Victory Motorcycles - Chrome Glow

Nah, I like the way yours looks. What did you do with your wiring? How did you hide it?

 

[no_fury]

Nah, I like the way yours looks. What did you do with your wiring? How did you hide it?

Just used some heat shrink tubing and hid it best I could.

 

[chopped]

I've got my stock signal housings if anyone needs them. You would have to add more wire on to them with your stock plug. Used my stock plugs for the replacement signals.

 

[RedspawnSilver]

Am I the only one who broke the blinker housing at that little tab on the top when replacing the orange lense with the Kuryakyn lense? I was trying to be very careful, but I broke two of them; one while pushing in the new lense and one while trying to pull out the old lense! I like the bike; you couldn't hurt the engine with a nuclear bomb, but I'm so sick and tired of cheap plastic $hit! Why can't they at least use a higher grade plastic? If I can afford it in the future, my next bike may be a Harley if I can find one that looks half way descent. I think I'm gonna' be pissed about this as long as I own this Fury.

How did you break the plastic? I'm still trying to wrap my head around that... I've messed with mine a few times and haven't broke the tabs... U have monkey thumbs.... And to answer your question, yes... really do think you're the only one to break one... rotfl...

 

[JimmyFarris]

I'm sure the aftermarket guys will be providing metal parts very soon.

 

[Goat]

How did you break the plastic? I'm still trying to wrap my head around that... I've messed with mine a few times and haven't broke the tabs... U have monkey thumbs.... And to answer your question, yes... really do think you're the only one to break one... rotfl...

So....I guess what you're saying is...you have also broken one or two. Is that correct? If you would come right out and say that you broke at least one, it would sure make me feel better.

 

[RedspawnSilver]

So....I guess what you're saying is...you have also broken one or two. Is that correct? If you would come right out and say that you broke at least one, it would sure make me feel better.

I have not broken any... Rotlf... monkey thumbs u have, may the force be with you....

 

[Goat]

I have not broken any... Rotlf... monkey thumbs u have, may the force be with you....

Apparently too much force was with me and my monkey thumbs, you ass.