[imwright1985]

Im trying to find a clean turnsignal setup for the front. I like Redspawn's alot and have been looking around, came up with an idea of what i want but dont know if they make it. I want the turnsignal's coming off the tripple tree's bolting to the tree with the bolt to clamp trees on the forks. Here is a pic i drew up on the schools library computer really quick. With having a mounting the yellow is where lights could be recessed into, it will help keep them away from the headlight to make them a little more visable but keep make them look more built in

 

[Snuffdog76]

I went with the set that is a chrome ring around the tree and you can't see it until you turn it on and then the LED is bright. Think it is from RAW? same place makes the undertail wrap around LED rear.

 

[RedspawnSilver]

Im trying to find a clean turnsignal setup for the front. I like Redspawn's alot and have been looking around, came up with an idea of what i want but dont know if they make it. I want the turnsignal's coming off the tripple tree's bolting to the tree with the bolt to clamp trees on the forks. Here is a pic i drew up on the schools library computer really quick. With having a mounting the yellow is where lights could be recessed into, it will help keep them away from the headlight to make them a little more visable but keep make them look more built in

This is similar to what you are looking for.... Keep the idea's coming though... also check out that website, they have some other cool LED's on there as well...

https://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=DS280098-DS280085

https://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=15083

https://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=DS-280191

I went with the set that is a chrome ring around the tree and you can't see it until you turn it on and then the LED is bright. Think it is from RAW? same place makes the undertail wrap around LED rear.

This is what he is talking about...

Radiantz LED Lighting - Toll Free 877-469-4241

 

[ogwutang]

the tube measures 45mm. i can't find anything to fit that size. but i do like those lights. if they have some that will fit i will definately get a set

 

[RedspawnSilver]

the tube measures 45mm. i can't find anything to fit that size. but i do like those lights. if they have some that will fit i will definately get a set

I know right!? Damn 45mm forks... only reason I didn't go with some of these options... Thinking if the material is thin enough, might be able to "make" it fit, but didn't feel like spending the money to just "find out".

 

[imwright1985]

i kinda like the phat ones, but like the thought of my idea where it would flow better with the tripple trees. I gotta keep looking though, im picky about the way things look and am kinda ehh on the fact its 2 sided tape holding redspawns on, plus with having them near the headlight having it overpowered a little by the headlight. Plus with my idea if it comes off the top tree it would have a nice concealment of the wires the way the stockers are.

 

[RedspawnSilver]

i kinda like the phat ones, but like the thought of my idea where it would flow better with the tripple trees. I gotta keep looking though, im picky about the way things look and am kinda ehh on the fact its 2 sided tape holding redspawns on, plus with having them near the headlight having it overpowered a little by the headlight. Plus with my idea if it comes off the top tree it would have a nice concealment of the wires the way the stockers are.

What's wrong with the two sided tape? lol... Same stuff that holds on the Kury engine billet covers, Kury chrome kit, RAW swing arm cover... etc, etc, etc...

I'll e-mail you that video I taped tonight, it doesn't over power it as much as you'd think... PM me your personal e-mail pls... Mmmm, or if my GF leave's me alone long enough I'll post it on YouTube...

 

[kingdave]

clamp for fury front fork tubes (turn signals)

the tube measures 45mm. i can't find anything to fit that size. but i do like those lights. if they have some that will fit i will definately get a set

J&P Cycles sells chrome clamps that will fit the front of the bike. dave

 

[RedspawnSilver]

J&P Cycles sells chrome clamps that will fit the front of the bike. dave

Thanks, will have to check it out...

 

[gary.williams20]

I put Kury mini silver bullets on the front, used the 49mm 2 pc clamp and put a piece of aluminum stap around the fork to fill the size difference. Turned out really good. You'd never know the clamps were 49mm. Made a big difference in the front profile. small lights in the same location as stock.

 

[Richard1]

I put Kury mini silver bullets on the front, used the 49mm 2 pc clamp and put a piece of aluminum stap around the fork to fill the size difference. Turned out really good. You'd never know the clamps were 49mm. Made a big difference in the front profile. small lights in the same location as stock.

Looks good! Just a suggestion, I would drop them all the way down just below your light. IMHO.

 

[imwright1985]

id rather steal an idea from the warrior's forum. this is a little closer to what i would like, but would rather it wrap the end of the trees so it blends a little more. was thinking triangular or diamond lights would look cool on that style mount. My main thought is to clear up any clutter from the forks, and do away with the lollipops(without 2sided tape) I gotta try getting some scrap stainless that i can pollish up and drill out for this, but i think it looks cleaner than some of the other options i have seen so far

 

[BarFury]

My main thought is to clear up any clutter from the forks, and do away with the lollipops........

It's been done already; save yourself the headache and go here:

MeanCycles - - .LED END CAPS FOR KURYAKYN GRIPS (RUNNING & TURN SIGNALS)

Cheers

 

[imwright1985]

Yeah thought about those, but if i do that i want to run all the electrical through the bars so would have to change the electrical controls over to something that will allow me to hide the wires completely and tap the hole under where the controls mount

 

[BarFury]

Yeah thought about those, but if i do that i want to run all the electrical through the bars so would have to change the electrical controls over to something that will allow me to hide the wires completely and tap the hole under where the controls mount

Negative!; put the hole/s about half-way down the bar/s, by and behind the wire-clip/s, then just parallel the existing wires into the headlight cowl.

Cheers

 

[imwright1985]

Negative!; put the hole/s about half-way down the bar/s, by and behind the wire-clip/s, then just parallel the existing wires into the headlight cowl.

Cheers

was looking at it and can run the wires with hole tapped under the lever bar mounts so very little of the wire is showing and route them out of the bars where speedo housing is. gotta save some $ then can do that and it will look close to being internal wiring until you look at the lever mounts and the speedo area closely

 

[Richard1]

Here's how mine turned out.

 

[Richard1]

 

[ogwutang]

Richard, you make the brackets yourself?

 

[Richard1]

Wish I could take credit for it, but Stump is the only one I know of making them.

Arizona Phats
374 Lily RD
London, KY 40744
1.606.877.5625
1.606.521.0122
[email protected]