[Fury Fever]

I am wanting to buy a fury, right front turn signal....I need the whole assembly that mounts to the forks...I do NOT need the orange cover and bulb or heat shield if it's missing...
I broke a small area of the chrome paint off...about 1/8" in size...I removed the orange front lens cover and replaced them with Kury smoked lenses...chipped it off removing it...
Thanks for any advice....I can't seem to find one on EBAY at this point..
Hopefully someone replaced/removed the their signals and will sell one...
mark

 

[chopped]

I have one, but the wiring is cut. I had to use it to wire up my new lights. I left about an inch of wire on the assembly, so you could extend them with yours.

 

[tdebeers]

I am wanting to buy a fury, right front turn signal....I need the whole assembly that mounts to the forks...I do NOT need the orange cover and bulb or heat shield if it's missing...
I broke a small area of the chrome paint off...about 1/8" in size...I removed the orange front lens cover and replaced them with Kury smoked lenses...chipped it off removing it...
Thanks for any advice....I can't seem to find one on EBAY at this point..
Hopefully someone replaced/removed the their signals and will sell one...
mark

FF,
I have the complete assembly. Installed RAW's LED's
Send me a PM if you are interested.
All the best
T